Traction Tread Mat

Product Number 50

Traction Tread mats are designed to provide slip-resistant floor protection in a variety of settings.


  • Slip-resistant floor protection matting.
  • Safe for use around static sensitive equipment.
  • Chemical, grease and oil resistant.
  • Easy to clean - hose off or sweep.

Recommended for use in commercial and industrial settings that require additional slip resistance or floor protection.

2' x 3' (23" x 32")
3' x 5' (32" x 58")
3' x 9' (32" x 108")
3' x 12' (32" x 143")
4' x 6' (46" x 70")
4' x 9' (46" x 108")
4' x 12' (46" x 143")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

CONSTRUCTION 
Material: Solid nitrile rubber
Thickness: 1/8 inch (0.125")

STANDARDS & TESTING

  • Certified high-traction by the National Floor Safety Institute (NFSI)
  • Passes flammability standard DOC-FF1-70
  • ASTM C1028-96 static coefficient of friction:
  •     Dry 0.97
        Wet 0.93
  • ESD rating of electrically conductive:
        Surface to surface at 50% relative humidity 6.2 x 10^4 ohms
        Surface to surface at 12% relative humidity 1.5 x 10^5 ohms
  • Melt point over 500 degrees F.  Tested at temperatures up to 1800 degrees F for welding/slag resistance  

Traction Tread mats can be cleaned by scrubbing with a deck brush (when needed) using detergent with a neutral pH, and rinsed with a hose or pressure washer. Mats should be laid flat or hung to dry.