DigiPrint HD Solid Mat

Recommended for indoor commercial use at entryways, in lobbies, at front desks or anywhere you want to protect your floors.

2' x 3' (24" x 35")
3' x 4' (35" x 47")
3' x 5' (35" x 59")
3' x 10' (35" x 119")
4' x 6' (45" x 69")
4' x 8' (45" x 95")
5' x 8' (58" x 95")
5' x 10' (58" x 119")
6' x 10' (68" x 119")
6' x 12' (68" x 143")

Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

SURFACE
Fiber: PET (polyethylene terephthalate) printed/disperse-dyed yarn 
Construction: Cut pile
Weight: 32 ounces/yard²
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard²)

BACKING OPTIONS

Material: Rubber (smooth or universal cleated)
Thickness:48-mil (body thickness 48-mil; border thickness 90-mil)

OVERALL MAT THICKNESS: 3/8 inch (0.375")

STANDARDS & TESTING

• Passes DOC-FF1-70 for the surface flammability of carpet
• Passes flammability tests EN ISO 11925-2 (2010) and EN ISO 9239-1 (2010)
• Passes BS 4790 (1987) determination of the flammability of textile floor coverings

For the best results, utilize the following cleaning method to clean your DigiPrint HD mat:

• Vacuum regularly (daily in high-traffic commercial areas; weekly in lower traffic areas).
• Extract or hose off as needed to remove heavy soil/debris.
• Hang mat to dry.

Always make sure the mat is dry before placing it back in service.

DigiPrint HD Solid mats that are backed with nitrile rubber can be commercially laundered.  Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. DigiPrint HD Solid mats are manufactured using PET Yarn.  PET is a type of polyester that needs to be processed using the proper chemistry to obtain optimal results. When PET products are exposed to oils, the yarn has an affinity to retain these oils.  We would recommend starting with 2 oz. of detergent per cwt., and 1 oz. of alkali per cwt, and add 4-oz. of hydrogen peroxide.  The level of chemicals required will depend on the type of accounts you service.  Please consult with your chemical supplier if you have additional questions or concerns.     

1. Flush 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
2. Flush (optional) 2-3 minutes, medium water level, 120 degrees F (49 degrees C)
3. Break 5-10 minutes, high water level, 120 degrees F (49 degrees C)
4. Rinse 2 minutes, high water level, cold
5. Rinse 2 minutes, high water level, cold
6. Extract (low speed) 1-2 minutes
7. Shake out (rotate wheel at wash speed with drain open) 1 minute
8. Extract (high speed max - 250 Gs) 3-5 minutes
9. Dry 5-10 minutes, 180 degrees F (82 degrees C) basket temp.
10. Cool down 5 minutes
11. Lay mats flat following removal from washer or dryer. Allow to cool before rolling.

For heavy soil mats, increase temperature to max 140 degrees F (60 degrees C).  Break should not exceed pH of 9.5; use low pH non-ionic detergents.  Do not over-dry mats; basket temperature of dryer should not exceed 180 degrees F (82 degrees C).  If mats are not dried, final rinse can be increased to 140 degrees F (60 degrees C).  This will reduce moisture retention following extraction.