Sure Stride Impressions Mats

Product Number 4427 (custom designs)

Sure Stride Impressions mats are used to display messages or reminders to customers, visitors and employees. The mat is adhesively backed to prevent it from moving around.

  • Photographic quality printing.
  • Features 150 standard color options.
  • Provides clear messages.
  • Customizable branding.
  • Stays in place due to an adhesive backing.
  • Convenient and hassle free.
  • Slip resistant.

Adhesive-backed mats designed to relay important information to customers, visitors, and employees.

17" x 17"
17" x 23.5"

Both sizes are sold in cases of 6.

Please note, mat size is approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.

Material: Solution-dyed polypropylene, with a heat-sealed polyurethane design
Weight: 12 ounces per square yard

Material: Releasable adhesive; moisture barrier is a polyester film

OVERALL THICKNESS: 3/32" (0.0938")


  • Certified high-traction by the National Floor Safety Institute (NFSI)
  • Passes flammability standard DOC-FF-1-70

Mat Size           Imprint Area
17" x 17"              6.5" x 8.5"
17" x 23.5"          8.5" x 11.5"

Special sizes are not available.  PMS matching is not available.  Imprint area is available in landscape/horizontal orientation only.

Minimum text height: 1/4"
Minimum line thickness: 1/16"

These text requirements arefor general use; however, special fonts and very thin letter forms may need tobe made larger or thicker and will be approached on a case-by-case basis.

Light background colors should be avoided dueto their tendency to show dirt on the mat more than a darker or neutral tone.

Please do not pick up the mat to clean the floor underneath until you are ready to replace it.

Sure Stride Impressions mats feature a low profile and can be left in place during daily floor cleaning activities. Floor scrubbers, vacuums, brooms, and mops will pass right over it without causing damage to the mat. Standard floor scrubbers may be used to clean the mat, however, please use low settings for water and pressure, and note that extended use of floor scrubbers could result in removal of the printed design.

Sure Stride mats are designed to dissipate water and dry quickly, however, standard fans and floor blowers can be used to expedite drying. For extremely wet conditions, use a wet vacuum or extractor to remove excess water.

Sure Stride mats are designed to last up to 3-4 months under normal conditions. If the mats are installed in a high-traffic area or shows signs of wear or a weakened bond to the floor prior to its intended life, it should be replaced.

  1. The floor must be clean and dry.
  2. Position the mat in the desired location, then press and smooth the mat into place.